Electrical Signalling Mode - Digi IX30 User Manual

Serial port
Access Digi Remote Manager from the Digi Navigator
You can access Digi Remote Manager from the Digi Navigator. Within the Remote Manager, you can
configure and monitor your Digi devices.
For information about using Digi Remote Manager, refer to the
1. Make sure Digi Navigator is installed.
2. Launch the Digi Navigator.
3. Click the Digi Remote Manager link in the toolbar.
4. The Digi Remote Manager login screen launches.
a. Enter your Remote Manager user name and password.
b. Click Login.

Electrical Signalling Mode

The IX30 is a DTE serial device capable of supporting the RS-232, RS-422, or RS-485 electrical
signalling modes. The default setting RS-232 signaling.
This section contains the following topics:
Change the electrical signalling mode to RS-232
Change the electrical signalling mode to RS-422
Change the electrical signalling mode to RS-485
IX30 User Guide
Electrical Signalling Mode
Digi Remote Manager User Guide.
260
261
263
259