Digi IX30 User Manual page 124

Interfaces
wwan1 Interface
---------------
APN
IPv4 surelink
IPv4 address
IPv4 gateway
IPv4 MTU
IPv4 DNS server(s)
IPv6 surelink
IPv6 address
IPv6 gateway
IPv6 MTU
TX bytes
RX bytes
Uptime
SIM
---
SIM Slot
SIM Status
IMSI
ICCID
SIM Provider
4G
--
RSRQ
RSRP
RSSI
SNR
>
Unlock a SIM card
A SIM card can be locked if a user tries to set an invalid PIN for the SIM card too many times. In
addition, some cellular carriers require a SIM PIN to be added before the SIM card can be used. If the
SIM card is locked, the IX30 device cannot make a cellular connection.

Command line
To unlock a SIM card:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
card:
IX30 User Guide
: 1234
: passing
: 189.232.229.47
: 189.232.229.1
: 1500
: 245.144.162.207, 245.144.162.208
: passing
: 11f6:4680:0d67:59d2:552b:3429:81a8:f1ea
: ff50:d95d:7e98:abe8:3030:9138:4f25:f51b
: 1500
: 127941
: 61026
: 10 hrs, 56 mins (39360s)
: 1
: ready
: 61582122197895
: 26587628655003992180
: AT&T
: Good (-11.0 dB)
: Good (-93.0 dBm)
: Excellent (-64.0 dBm)
: Good (6.4 dB)
modem puk unlock command to set a new PIN for the SIM
Wide Area Networks (WANs)
124