Digi IX30 User Manual page 416

Virtual Private Networks (VPN)
3. Click VPN > OpenVPN > Clients.
4. Create a new OpenVPN client or select an existing one:
To create a new OpenVPN client, see
n
or Configure an OpenVPN client without using an .ovpn
To edit an existing OpenVPN client, click to expand the appropriate client.
n
5. After creating or selecting the OpenVPN client, click Active recovery.
6. Enable active recovery.
7. For Restart interface, enable to configure the device to restart the interface when its
connection is considered to have failed. This is useful for interfaces that may regain
connectivity after restarting, such as a cellular modem.
8. For Reboot device, enable to instruct the device to reboot when the WAN connection is
considered to have failed.
9. Change the Interval between connectivity tests.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}.
For example, to set Interval to ten minutes, enter 10m or 600s.
The default is 15 minutes.
IX30 User Guide
Configure an OpenVPN client by using an .ovpn file
file.
OpenVPN
416