Exit The Command Line Interface; Execute A Command From The Web Interface - Digi IX30 User Manual

Command line interface
Select access or quit [admin] :
Type a or admin to access the IX30 command line.
You will now be connected to the Admin CLI:
Connecting now...
Press Tab to autocomplete commands
Press '?' for a list of commands and details
Type 'help' for details on navigating the CLI
Type 'exit' to disconnect from the Admin CLI
>
See Command line interface

Exit the command line interface


Command line
1. At the command prompt, type exit.
> exit
2. Depending on the device configuration, you may be presented with another menu, for
example:
Access selection menu:
Select access or quit [admin] :
Type q or quit to exit.

Execute a command from the web interface

1. Log into the IX30 WebUI as a user with Admin access.
2. At the main menu, click Terminal. The device console appears.
IX30 login:
3. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX30 User Guide
for detailed instructions on using the command line interface.
a: Admin CLI
s: Shell
q: Quit
Exit the command line interface
977