Table of Contents
Advertisement
Services
Totals
------
Bytes sent
Bytes received
Messages sent
Messages received : 0
Clients
-------
Total
Maximum
Connected
Disconnected
Expired
Subscriptions
-------------
Total
Shared
Message Store
-------------
Bytes
Messages
Retained messages : 40
PUBLISH Messages
----------------
Bytes sent
Bytes received
Messages sent
Messages received : 0
Messages dropped
>
3. Use the
show mqtt
five, and fifteen minutes.
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Use the iPerf service
Your IX30 device includes an iPerf3 server that you can use to test the performance of your network.
iPerf3 is a command-line tool that measures the maximum network throughput an interface can
handle. This is useful when diagnosing network speed issues, to determine, for example, whether a
cellular connection is providing expected throughput.
The IX30 implementation of iPerf3 supports testing with both TCP and UDP.
IX30 User Guide
: 158400
: 4500
: 0
: 1
: 5
: 1
: 0
: 0
: 1
: 1
: 151
: 35
: 0
: 0
: 0
: 0
command to return additional information, including averages over one,
Use the iPerf service
613
Advertisement
Table of Contents
