Table of Contents
Advertisement
Interfaces
4. Create the LAN or select an existing LAN:
To create a new LAN, for Add interface, type a name for the LAN and click .
n
To edit an existing LAN, click to expand the LAN.
n
The Interface configuration window is displayed.
New LANs are enabled by default. To disable, toggle off Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select the appropriate firewall zone. See
information.
7. For Device, select an Ethernet device or a bridge. See
bridging.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The IX30 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the IX30 device.
c. Set the Reauth period.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select Static IP address.
c. For Address, type the IP address and subnet of the LAN interface. Use the format IPv4_
address/netmask, for example, 192.168.2.1/24.
d. Optional IPv4 configuration items:
i. Set the Metric.
ii. For Weight, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric, Weight is used to load balance
traffic to the interfaces.
iii. Set the Management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the MTU.
IX30 User Guide
Local Area Networks (LANs)
Firewall configuration
for further
Bridging
for more information about
153
Advertisement
Table of Contents
