Schedule A Script To Run In The Container - Digi IX30 User Manual

Containers
test_lxc
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Schedule a script to run in the container

This simple example will:
1. Start the container in non-persistent mode.
2. Execute a ping command every ten seconds from inside the container.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts.
IX30 User Guide
True enabled
Use Digi Remote Manager to view and manage your
Schedule a script to run in the container
RUNNING PID 19327
817