Serial port
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Serial > Port 1.
4. For Electrical signalling mode, select RS-422.
5. Click Apply to save the configuration and apply the change.
Command line
IX30 User Guide
Use Digi Remote Manager to view and manage your
Electrical Signalling Mode
262