Install The Digi Navigator - Digi IX30 User Manual

Serial port
Filter devices for display in the Digi Navigator
n
Access Digi Remote Manager from the Digi Navigator
n

Install the Digi Navigator

This section explains how to download and install the Digi Navigator application.
Note Microsoft Visual C++ is required for RealPort and is installed by default during the Digi Navigator
install process.
1. Navigate to the
Note The Digi Navigator application can also be downloaded from your device's product
support page.
2. Scroll down to the Product Resources tab, and in the Drivers & Patches section, click Digi
Navigator.
3. From the list box, select the appropriate Microsoft Windows option from the list of driver
options.
4. Click the download link to download the Digi Navigator application.
5. When the download is complete, click on the downloaded .exe file. The Digi Navigator Setup
wizard displays.
6. Select which user(s) should be able to launch the Digi Navigator from this computer after it
has been installed:
Anyone who uses this computer (all users): Any user who logs into this computer can
n
launch the Digi Navigator.
Only for me. Only the user who was logged in to this computer when the Digi
n
Navigator was installed can launch the Digi Navigator. This is the default.
7. Click Install. The Completing Digi Navigator Setup screen displays.
8. Choose the Run Digi Navigator option if you want to launch the Navigator when the
installation is complete.
IX30 User Guide
Digi Navigator support page.
Configure RealPort mode using the Digi Navigator
253