Table of Contents
Advertisement
Services
6. Define actions to be taken when the device's location triggers a geofence event:
To define actions that will be taken when the device enters the geofence, or is inside
n
the geofence when it boots:
a. (Optional) Configure the device to preform the actions if the device is inside the
b. Set the number of
c. Add an action:
d. Set the type of action:
IX30 User Guide
geofence when it boots:
(config)> service location geofence test_geofence on_entry
bootup true
(config)>
update_intervals
actions:
(config)> service location geofence test_geofence on_entry num_
intervals int
(config)>
For example, if the update interval is 1m (one minute) and the num_intervals is set
to 3, the actions will not be performed until the device has been inside the
geofence for three minutes.
i. Type ... to return to the root of the configuration:
(config service location geofence test_geofence coordinates
3)> ...
(config)>
ii. Add the action:
(config)> add service location geofence test_geofence on_
entry action end
(config service location geofence test_geofence on_entry
action 0)>
(config service location geofence test_geofence on_entry action
0)> type value
that must take place prior to performing the
Location information
556
Advertisement
Table of Contents
