Digi IX30 User Manual page 643

Applications
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<device id="00000000-00000000-0000FFFF-485740BC"/>
</targets>
<requests>
<device_request target_name="myTarget">
</device_request>
</requests>
</data_service>
</sci_request>
7. For the device_request element, replace the value of target_name with showSystem. This
matches the target parameter of the device_request.register function in the showsystem.py
application.
<device_request target_name="showSystem">
8. Click Send.
You should receive a response similar to the following:
<sci_reply version="1.0">
<data_service>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<requests>
seconds (164987s)
request>
</requests>
IX30 User Guide
my payload string
<device_request target_name="showSystem" status="0">Model
: Digi IX30
Serial Number
Hostname
MAC
Hardware Version
Firmware Version
Bootloader Version
Firmware Build Date
Schema Version
Timezone
Current Time
CPU
Uptime
Temperature
Contact
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
Develop Python applications
: IX30-000068
: IX30
: 00:40:D0:13:35:36
: 50001959-01 A
: 22.11.48.10
: 1
: Thurs, 24 November 2022 19:48:00
: 461
: UTC
: Thurs, 24 November 2022 19:48:00
: 1.1
: 1 day, 21 hours, 49 minutes, 47
: 39C
: Jane Smith
: 0.10, 0.05, 0.00
: 85.176MB/250.484MB(34%)
: 0.068MB/13.416MB(1%)
: 47.724MB/5309.752MB(1%)
: MB/MB(%)
: 0.004MB/40.96MB(0%)
: 0.820MB/32.768MB(3%)</device_
643