Table of Contents
Advertisement
Virtual Private Networks (VPN)
n
n
b. Paste the contents of the CA certificate (usually in a ca.crt file), the Public key (for
example, server.crt), the Private key (for example, server.key), and the Diffie Hellman
key (usually in dh2048.pem) into their respective fields. The contents will be hidden when
the configuration is saved.
10. (Optional) Click to expand Access control list to restrict access to the OpenVPN server:
To limit access to specified IPv4 addresses and networks:
n
a. Click IPv4 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv4 address or network that can access the device's
d. Click again to list additional IP addresses or networks.
To limit access to specified IPv6 addresses and networks:
n
a. Click IPv6 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv6 address or network that can access the device's
d. Click again to list additional IP addresses or networks.
To limit access to hosts connected through a specified interface on the IX30 device:
n
a. Click Interfaces.
b. For Add Interface, click .
c. For Interface, select the appropriate interface from the dropdown.
d. Click again to allow access through additional interfaces.
To limit access based on firewall zones:
n
a. Click Zones.
b. For Add Zone, click .
c. For Zone, select the appropriate firewall zone from the dropdown.
d. Click again to allow access through additional firewall zones.
IX30 User Guide
Username/password only: Uses a username and password for client
authentication. You must create an OpenVPN authentication group and user. See
Configure an OpenVPN Authentication Group and User
Certificate and username/password: Uses both certificates and a username and
password for client authentication. Each client requires a public and private key,
and you must create an OpenVPN authentication group and user. See
OpenVPN Authentication Group and User
service-type. Allowed values are:
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any: No limit to IPv4 addresses that can access the service-type.
l
service-type. Allowed values are:
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any: No limit to IPv6 addresses that can access the service-type.
l
See
Firewall configuration
for instructions.
for information about firewall zones.
OpenVPN
for instructions.
Configure an
397
Advertisement
Table of Contents
