Table of Contents
Advertisement
Diagnostics
speed
stat
user
wol
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the status interval, which
is the time interval between periodic status events. For example, to configure DHCP server
logging:
i. Use the question mark (?) to determine what events are available for DHCP server
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.
--------------
events
(config)> system log event dhcpserver
ii. To disable informational messages for the DHCP server:
(config)> system log event dhcpserver info false
(config)>
iii. To change the status interval:
(config)> system log event dhcpserver status_interval value
(config)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the
format number{w|d|h|m|s}.
For example, to set the status interval to ten minutes, enter either 10m or 600s:
(config)> system log event dhcpserver status_interval 600s
(config)>
6. (Optional) See
servers to which log messages will be sent.
IX30 User Guide
Parameters
-----------------------------------------------------------------
info
status
status_interval
Configure syslog servers
Configure options for the event and system logs
Speed
Network statistics
User
Wake-On-LAN
Current Value
true
Enable informational
true
Enable status events
30m
Status interval
for information about configuring remote syslog
932
Advertisement
Table of Contents
