Table of Contents
Advertisement
Revision
Date
C
September 2022
IX30 User Guide
Description
Include the hostname of the device in the client
l
.ovpn file listed on the Status → OpenVPN → Servers
page in the web UI.
Location services enhancements:
n
New settings to control the NMEA message content
l
that the devices sends when there is no valid fix
from any of the configured location sources.
Release of Digi IX30 firmware version 22.8:
Cellular modem enhancements:
n
Added modem ota download and system
l
firmware ota download commands for
downloading cellular modem and device firmware.
Added cellular carrier name and PLMN ID to the
l
Modems Status page in the Web UI.
Enhanced access technology options to set the
l
modem to 5G-only, including setting to 5G SA-only,
NSA-only, or both NSA/SA-modes.
VPN enhancements:
n
Added Dynamic Multipoint VPN (DMVPN) support.
l
Added a Strict routing setting to IPsec tunnels that
l
routes packets through the tunnel if both the
source IP and destination IP match the IPsec
tunnel's policies. This makes IPsec behave like a
policy-based VPN, rather than a route-based VPN.
Added the Microsoft version of the Challenge-
l
Handshake Authentication Protocol (MS-CHAPv2) as
an option for L2TP network servers authentication
methods.
Container support:
n
Container support now a premium feature, enabled
l
through Digi Remote Manager.
Added new metrics for sending container status,
l
name, CPU load, and disk usage as datapoints to
DigiRM.
Added support for running a PPPoE server when an
n
interface is in IP passthrough mode.
Added ability to specify DFS channels for Wi-Fi client
n
background scanning when DFS client support is
enabled.
Added a show eth Admin CLI command to show the
n
link status of each Ethernet port.
Added a poweroff CLI command to perform a graceful
n
3
Advertisement
Table of Contents
