Show Ip Route Preferences; Show Ip Stats; Show Routing Heap Summary - NETGEAR ProSafe M7100-24X User Manual

Routes with 1 Next Hop......................... 31
Routes with 2 Next Hops........................ 1
Routes with 4 Next Hops........................ 1000

show ip route preferences

This command displays detailed information about the route preferences. Route preferences
are used in determining the best route. Lower router preference values are preferred over
higher router preference values. A route with a preference of 255 cannot be used to forward
traffic.
Format
show ip route preferences
Modes
• Privileged EXEC
• User EXEC
Term Definition
Local
The local route preference value.
Static
The static route preference value.
OSPF Intra
The OSPF Intra route preference value.
OSPF Inter
The OSPF Inter route preference value.
OSPF External
The OSPF External route preference value.
RIP
The RIP route preference value.

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information
about the fields that are displayed.
Format
show ip stats
Modes
• Privileged EXEC
• User EXEC

show routing heap summary

This command displays a summary of the memory allocation from the routing heap. The
routing heap is a chunk of memory set aside when the system boots for use by the routing
applications.
Format
show routing heap summary
Mode
Privileged EXEC
ProSafe Managed Switch
Routing Commands
239