User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default
Format
Mode
no ip http secure-protocol
This command is used to remove protocol levels (versions) for secure HTTP.
Format
Mode
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default
Format
Mode
no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format
Mode
ip http server
This command enables access to the switch through the Web interface. When access is enabled,
the user can login to the switch from the Web interface. When access is disabled, the user cannot
login to the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are effected.
8-34
SSL3 and TLS1
ip http secure-protocol [SSL3] [TLS1]
Privileged EXEC
no ip http secure-protocol [SSL3] [TLS1]
Privileged EXEC
Disabled
ip http secure-server
Privileged EXEC
ip http secure-server
Privileged EXEC
202-10009-01_060204
Switching Commands