User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
no spanning-tree bpdumigrationcheck
This command disables BPDU migration check on a given interface. The all option disables
BPDU migration check on all interfaces.
Format
Mode
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of at most 32 characters.
Default
Format
Mode
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
Mode
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level is a
number in the range of 0 to 65535.
Default
Format
Mode
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using to the default value, i.e. 0.
8-120
no spanning-tree bpdumigrationcheck {<slot/port> |
all}
Global Config
The base MAC address displayed using hexadecimal notation as specified in
IEEE 802 standard.
spanning-tree configuration name <name>
Global Config
no spanning-tree configuration name
Global Config
0
spanning-tree configuration revision <0-65535>
Global Config
202-10102-01, May 2005
Switching Commands