No Port-Channel Linktrap; Port-Channel Name; Protocol Group; No Protocol Group - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default
Format
Mode

no port-channel linktrap

This command disables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option
channel with the same administrative mode setting.
Format
Mode

port-channel name

This command defines a name for the port-channel (LAG). The interface is a logical slot and port
for a configured port-channel, and name is an alphanumeric string up to 15 characters. This
command is used to modify the name that was associated with the port-channel when it was
created.
Format
Mode

protocol group

This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Default
Format
Mode

no protocol group

This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <groupid>.
Format
Mode
Switching Commands
Enabled
port-channel linktrap {<logical slot/port> | all}
Global Config
no port-channel linktrap {<logical slot/port> | all}
GlobalConfig
port-channel name {<logical slot/port> | all} <name>
Global Config
none
protocol group <groupid> <vlanid>
VLAN database
no protocol group <groupid> <vlanid>
VLAN database
202-10009-01_060204
every configured port-
all sets
8-41