Vlan Port Priority All; Vlan Priority; Lag/Port-Channel (802.3Ad) Commands; Port-Channel Staticcapability - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

vlan port priority all

This command configures the port priority assigned for untagged packets for all ports presently
plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration
will override this configuration setting.
Format
Mode

vlan priority

This command configures the default 802.1p port priority assigned for untagged packets for a
specific interface. The range for the priority is 0-7
Default
Format
Mode

LAG/Port-Channel (802.3ad) Commands

port-channel staticcapability

This command enables the support of port-channels (static link aggregations - LAGs) on the
device. By default, the static capability for all port-channels is disabled.
Default
Format
Mode

no port-channel staticcapability

This command disables the support of static port-channels (link aggregations - LAGs) on the
device.
Default
8-16
s
how classofservice dot1pmapping
Privileged EXEC and User EXEC
vlan port priority all <priority>
Global Config
0
vlan priority <priority>
Interface Config
Disabled
port-channel staticcapability
Global Config
Disabled
December 2004, 202-10010-02
Switching Commands