Vlan Makestatic; Vlan Name; Vlan Participation - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
6.1.6.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
Mode

6.1.7 vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP
registration) to a static VLAN (one that is permanently configured and defined). The ID is
a valid VLAN identification number. VLAN range is 2-4093
Format
Mode

6.1.8 vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to
32 characters, and the ID is a valid VLAN identification number. ID range is 1-4093.
Default
Format
Mode
6.1.8.1 no vlan name
This command sets the name of a VLAN to a blank string.
Format
Mode

6.1.9 vlan participation

This command configures the degree of participation for a specific interface in a VLAN.
The ID is a valid VLAN identification number, and the interface is a valid interface
number
.
Format
Mode
6-4
no vlan ingressfilter
Interface Config
vlan makestatic <2-4093>
VLAN Config
VLAN ID 1 - default; other VLANS - blank string
vlan name <1-4093> <name>
VLAN Config
no vlan name <1-4093>
VLAN Config
vlan participation {exclude | include | auto} <1-
4093>
Interface Config
v4.1, October 2008
VLAN Commands