Operation Settings Screen - Mitsubishi Electric AE-200A Instruction Book

3-1-5. Operation settings screen

On the screen under the [Monitor/Operation] menu, selecting the group icon and touching [Operate] (click [Advanced]
on the Integrated Centralized Control Web) will bring up the operation settings screen for the selected group. The
current operation conditions will appear.
Change necessary operation settings, and then touch [OK] (click [Send] on the Integrated Centralized Control
Web) to save the settings. Touch [Cancel] (click [Close] on the Integrated Centralized Control Web) to return to the
previous screen without making any changes.
Note: When the setting is changed from other controllers, the operation conditions shown on the screen will not be updated while
the screen is open.
3-1-5-1. LCD
1st page
Group icon
Group name
ON/OFF
Operation mode
Set temperature
Touch to go to the next
page.
2nd page
Prohibit Remote Controller
Schedule
Touch to go to the previous
page.
Note: The Setback mode can be selected on the AE-200A/AE-50A, but not on the AE-200E/AE-50E.
Note: The Hold function can be used on the AE-200A/AE-50A, but not on the AE-200E/AE-50E.
WT07982X03
19
Floor name or block name
Air Direction
Fan Speed
Cancel
Touch to return to the
previous screen without
making any changes.
OK
Touch to reflect the changes
made.
Hold
Filter Sign