2.2
Performance Specifications of Ethernet
The following table lists the performance specifications of Ethernet of the RJ71GN11-T2.
Item
Transmission specifications
Data transmission speed
Communication mode
Interface
Maximum frame size
Jumbo frame
Maximum segment length
Number of cascade connections
IP version
Sending/receiving data
Number of simultaneous
storage memory
open connections
(maximum number of
connections)
*1 For maximum segment length (length between switching hubs), consult the manufacturer of the switching hub used.
*2 Consult the manufacturer of the switching hub used.
*3 When one connection is for one device, up to eight devices can be connected.
*4 This speed can be used for the firmware version "04" or later.
The operation of commercial devices used for the following applications is not guaranteed. Check the
operation before using the module.
• Internet (general public line) (Internet-access service offered by an Internet service provider or a
telecommunications carrier)
• Firewall device(s)
• Broadband router(s)
• Wireless LAN
2.3
Hardware Specifications
The following table lists the hardware specifications for the RJ71GN11-T2 and the RJ71GN11-SX.
Item
Number of occupied I/O points
Internal current consumption (5VDC)
External
Height
dimensions
Width
Depth
Weight
Connection with MELSOFT
products and a GOT
Connection to SLMP-compatible
devices
RJ71GN11-T2
32 points (I/O assignment: Intelligent 32 points)
0.81A
106mm (Base unit mounting side: 98mm)
27.8mm
110mm
0.2kg
Description
• 1Gbps
*4
• 100Mbps
• 1000BASE-T
Full-duplex
*4
• 100BASE-TX
RJ45 connector (Auto MDI/MDI-X)
1518 bytes
Not available
100m (distance between a switching hub and a station)
*2
Compatible with IPv4
*3
8 connections
*3
8 connections
RJ71GN11-SX
0.80A
0.17kg
2 SPECIFICATIONS
2.2 Performance Specifications of Ethernet
2
*1
23