Display Mac-Address Aging-Time - HP 3600 v2 Series Command Reference Manual

If you execute this command without specifying any parameters, it displays information of all MAC
address entries on the device, including unicast MAC address entries and static multicast MAC address
entries.
If you execute this command using only the vlan keyword or the count keyword, or only these two
keywords, it displays information of unicast MAC address entries and static multicast MAC address
entries.
Related commands: mac-address (system view), mac-address (interface view), and mac-address timer;
display mac-address multicast and display mac-address multicast count (IP Multicast Command
Reference).
Examples
# Display the MAC address table entry for MAC address 000f-e201-0101.
<Sysname> display mac-address 000f-e201-0101
MAC ADDR
000f-e201-0101
--- 1 mac address(es) found
Table 13 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)
1 mac address(es) found

display mac-address aging-time

Syntax
display mac-address aging-time [ | { begin | exclude | include } regular-expression ]
View
Any view
VLAN ID STATE
1 Learned
---
Description
MAC address.
ID of the VLAN to which the MAC address belongs.
State of a MAC address entry:
•
Config static—The static entry manually configured by the user.
•
Config dynamic—The dynamic entry manually configured by the user.
•
Learned—The entry learned by the device.
•
Blackhole—The blackhole entry.
•
Multicast—The static multicast MAC address entry manually configured by
the user. For more information about static multicast MAC address entries,
see IP Multicast Configuration Guide.
Number of the port corresponding to the MAC address. Packets destined to
this MAC address are sent out of this port. (Displayed as N/A for a blackhole
MAC address entry).
Aging time:
•
AGING—The entry is aging.
•
NOAGED—The entry does not age.
One MAC address entry is found.
PORT INDEX
Ethernet1/0/1
62
AGING TIME(s)
AGING