Display Mac-Address Aging-Time - HP 3100 v2 Series Command Reference Manual

If you execute this command using only the vlan keyword or the count keyword, or only these two
keywords, it displays information of unicast MAC address entries and static multicast MAC address
entries.
Related commands: mac-address (system view), mac-address (interface view), and
mac-address timer; display mac-address multicast and display mac-address multicast count
(IP Multicast Command Reference).
Examples
# Display the MAC address table entry for MAC address 000f-e201-0101.
<Sysname> display mac-address 000f-e201-0101
MAC ADDR
000f-e201-0101
--- 1 mac address(es) found
Table 11 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)
1 mac address(es) found

display mac-address aging-time

Syntax
display mac-address aging-time [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
VLAN ID STATE
1 Learned
---
Description
MAC address.
ID of the VLAN to which the MAC address belongs.
State of a MAC address entry:
•
Config static—The static entry manually configured by the user.
•
Config dynamic—The dynamic entry manually configured by the user.
•
Learned—The entry learned by the device.
•
Blackhole—The blackhole entry.
•
Multicast—The static multicast MAC address entry manually
configured by the user. For more information about static multicast
MAC address entries, see IP Multicast Configuration Guide.
Number of the port corresponding to the MAC address. Packets destined to
this MAC address are sent out of this port. (Displayed as N/A for a blackhole
MAC address entry).
Aging time:
•
AGING—The entry is aging.
•
NOAGED—The entry does not age.
One MAC address entry is found.
PORT INDEX
Ethernet1/0/1
51
AGING TIME(s)
AGING