Mounting The Wall Mount Unit On A Wall Plate; Figure 11-43 Removing Multiline Terminal From The Wall Mount Unit; Figure 11-44 Mounting Wall Mount Unit On The Wall Plate - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
12.2
System Hardware Manual
To remove the multiline terminal, press the tabs at the bottom as shown in
Figure 11-43 Removing Multiline Terminal from the Wall Mount
up on the multiline terminal until it comes loose.

Figure 11-43 Removing Multiline Terminal from the Wall Mount Unit

Mounting the Wall Mount Unit on a Wall Plate

1. Locate the screw holes on the wall mount unit and hang the cover over
the screws on the wall plate as illustrated in
Mount Unit on the Wall
This method is not recommended because of varied strength of switch boxes.

Figure 11-44 Mounting Wall Mount Unit on the Wall Plate

Figure 11-44 Mounting Wall
Plate.
Issue No. 1.5
Unit, and push
11 - 25