Pz-Vm21 (Voice Mail Daughter Board); Description; Figure 6-8 Pz-Vm21 Daughter Board - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.4
System Hardware Manual

PZ-VM21 (Voice Mail Daughter Board)

3.4.1

Description

The
PZ-VM21 is common to both UNIVERGE SV8100/SV8300
systems.
Failure to properly install and program ports
higher than 64 (as described below) can
corrupt the SV8100 database.
If the PZ-ME50-AU has not been physically
installed on the CD-CP00-AU, do not attempt
to change the PCPro database configuration
to indicate that the PZ-ME50-AU has been
installed on the CD-CP00-AU, program ports
64 and higher and then upload the PCPro
configuration to the SV8100 system. This
process can cause the SV8100 database to
become corrupted. Refer to the next bullet for
the proper installation/programming
procedure.
To properly install and configure the
PZ-ME50-AU; first install the PZ-ME50-AU
on the CD-CP00-AU. To program the ports
above 64 using PCPro, perform a new
download before attempting to program the
ports.

Figure 6-8 PZ-VM21 Daughter Board

Issue No. 1.5
6 - 33