Chs Large Batt Box Fuse Replacement; Figure 4-71 Install The Fan Access Panel; Figure 4-72 Removing Chs Large Batt Box Cover - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
6. Insert the access panel tab into the rear of the CHS1U-AU
chassis running the Battery Connection Cable through the
cutout. Secure panel with the retaining screw. Refer to
4-71 Install the Fan Access
7. Connect grounding and AC power cables.
4.2.4

CHS LARGE BATT BOX Fuse Replacement

1. Loosen screw on front of CHS LARGE BATT BOX. Refer to
Figure 4-72 Removing CHS LARGE BATT BOX
Panel.

Figure 4-71 Install the Fan Access Panel

Figure 4-72 Removing CHS LARGE BATT BOX Cover

Issue No. 1.5
Figure
Cover.
4 - 51