UNIVERGE SV8100/SV8300
System Hardware Manual
4.
Align the four cutouts with the four tabs on the WM-L( ) UNIT
(refer to
Figure 7-81 Cutouts for WM-L( ) UNIT on page
Figure 7-81 Cutouts for WM-L( ) UNIT
5.
Push up on the WM-L( ) UNIT until it snaps into place (refer to
Figure 7-82 WM-L( ) UNIT
Installed).
Figure 7-82 WM-L( ) UNIT Installed
Issue No. 1.5
7-63).
7 - 63