Figure 7-69 Press Serial Cable Into Groove; Figure 7-70 Securing The Dcl-60-1 Console With Screws - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
7 - 56
7.
8.
9.

Figure 7-70 Securing the DCL-60-1 CONSOLE with Screws

10.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Carefully push the Serial cable into the Serial Cable
Groove (ITL, DT700 only).

Figure 7-69 Press Serial Cable into Groove

Using the guides, slide the DCL-60-1( ) onto the
installed bracket (refer to
Cable into Groove).
Secure the DCL-60-1 CONSOLE to the bracket with
the two screws provided.
Open the small door covering the side option
connectors by pulling the cover latch toward you
(refer to Figure 7-71 Serial Cable
DT700 only).
UNIVERGE SV8100/SV8300
Figure 7-69 Press Serial
Installed, ITL,