Issue No. 1.5
3.4
4 - 22
Rack Mounting the 19" Chassis
A single or multiple chassis can be rack mounted. Controlling and Expansion
chassis can be racked mounted by stacking them horizontally.
1.
The 19" chassis requires two rack mount brackets per chassis for
mounting. Each 19" chassis requires its own set of rack mount bracket(s).
Refer to
Figure 4-22 CHS2U-AU Rack Mount
2.
Line up the Rack Mount Bracket(s) with the pre-drilled holes on each side
of the 19" chassis.
3.
Secure the brackets to the chassis using the supplied screws. Refer to
Figure 4-23 Rack Mount Bracket Installed 19" CHS2U-AU on page 4-23
for the 19" chassis.
Stacking additional chassis (without rack
mount brackets) on top of one rack
mounted chassis is not recommended.
Figure 4-22 CHS2U-AU Rack Mount Brackets
UNIVERGE SV8100/SV8300
Brackets.
Installing the SV8100 Chassis