Figure 10-38 Enter Line Details Dialog Box - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
10. Double click on the first line in the sequence to
configure. The Enter Line Details dialog box is
displayed (each device is identified with a unique
serial number – followed by a 1, 2, 3 or 4 which
identifies the port from left to right on the device).

Figure 10-38 Enter Line Details Dialog Box

11. Name the device (user or extension name).
12. Click on the Browse button to identify the storage
location for the device.
13. It is recommended that you create a Master Calls
folder with a subfolder for each device. This makes it
easier to search for archived calls. It is also
recommended that you boost the remote signal and
check for quality with a test call.
14. Audio Balance – allows you to increase or decrease
the audio balance of the recording. Leaving Local
and Remote at 100% leaves the recording as-is. It is
suggested to perhaps boost the remote side on most
installs to 150%, but to test prior to leaving this setting
as-is.
15. Ignore Calls – although the Recorder Starts
recording automatically, this setting tells the system
only to Save calls longer than this preset threshold.
Issue No. 1.5
10 - 45