Figure 8-10 Stowing The Bottom Unit Cable; Figure 8-11 Insert Stopper For Handset Use - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
17. Push the latch to release the cover (see
Bottom Unit Cable). Stow the extra bottom unit connecting cable
and close the cover.

Figure 8-10 Stowing the Bottom Unit Cable

18. Cut or trim the supplied coupled device for the tilt legs handset
option.
19. Insert the stopper coupled device into the right and left tilt legs
(see Figure 8-11 Insert Stopper for Handset

Figure 8-11 Insert Stopper for Handset Use

20. Set the coupled device for tilt legs into position.
21. Reinstall the legs, pushing upwards until both locks snap into
place.
22. Set tilt legs to desired position.
Issue No. 1.5
Figure 8-10 Stowing the
Use).
8 - 9