NEC UNIVERGE SV8100 System Hardware Manual page 276

Issue No. 1.5
6 - 16
C-Channel Control
Conference: 64 Channels
Caller ID Receiver; 32 Channels
Caller ID Generator; 4 or 10 Channels for Analog Stations
This can be expanded up to 20 by disabling 32 channels of the
Conference circuits and disabling the MFC Tone Sender
A load switch which is used for initial system startup, resetting the
system, or when upgrading system software
One Serial Port (Adapter module required)
One USB Port – USB 1.1
Memory size – minimum of 32MB (normally 512MB or 1GB) should be used.
USB device power consumption is less than 200mA(2W).
One Gbit Ethernet Port for VoIP function
One CompactFlash Card Slot
Background Music/EXSP Control Port
Status LED
BGM LED
EXSP Control LED
Two Audio Input/Output Terminals
One General Purpose Control Terminal
One Music On Hold External Source
High-Level Data Link Control (HDLC) Packet Processing
Real Time Clock (tolerance 30 seconds/month)
Internal MOH Generation (supplied from Melody IC)
Call Control Server (ex: Conference Bridge Server, Voice Mail
Server, SIP Server, RTP Forwarding, VoCoder Conversion)
One lithium battery (Sony CR2032 or equivalent) which provides
battery back-up of system data and RAM memory for
approximately 30 months.
The CD-CP00-AU functions provided are:
Call Control Server
Conference Bridge Server
Voice Mail Server (voice mail requires a compact flash card)
SIP Server
RTP Forwarding
VoCoder Conversion
UNIVERGE SV8100/SV8300
Installing the SV8100/SV8300 Blades