Figure 4-52 Installing Two Batteries; Figure 4-53 Installing Battery Cable - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
4 - 40
7. Install two 2.3 AH-12V batteries (locally procured) into the CHS2U BATT
MTG KIT (refer to
The first battery must be installed on the left side, then slid to the right due to an
installation tab on the mounting kit.

Figure 4-52 Installing Two Batteries

8. Using the supplied screws, secure the brackets to the CHS2U BATT MTG
KIT (refer to Figure 4-52 Installing Two Batteries on page
9. Connect the provided battery cables to the batteries (refer to
Installing Battery
Figure 4-52 Installing Two
Cable).

Figure 4-53 Installing Battery Cable

UNIVERGE SV8100/SV8300
Batteries).
4-40).
Figure 4-53
Installing the SV8100 Chassis