Figure 10-3 Remove Plastic Cover From Cable Hole; Table 10-2 Pgd(2)-U( ) Adp S3 - S6 Jumper Settings - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
Channel 1
Channel 2
System Hardware Manual
2. Using a screwdriver, break out the plastic piece covering the cable hole.

Figure 10-3 Remove Plastic Cover from Cable Hole

3. Set the S3 – S6 jumpers to the proper settings for the function to be used
(refer to Table 10-2 PGD(2)-U( ) ADP S3 – S6 Jumper Settings on page
10-3).
Table 10-2 PGD(2)-U( ) ADP S3 – S6 Jumper Settings
S3 S4
Open Open
Open Short
Short Open
Short Short
S5 S6
Open Open
Open Short
Short Open
Short Short
Function
Door Box
External Paging Speaker
External Ringer
External Music on Hold /
Recording System
Function
Door Box
External Paging Speaker
External Ringer
External Music on Hold /
Recording System
Issue No. 1.5
LED Indication
On when in use.
On when in use.
On when in use.
On steady.
LED Indication
On when in use.
On when in use.
On when in use.
On steady.
10 - 3