Install Cooling Fan - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
5 - 76
5.2.2

Install Cooling Fan

1. Align replacement fan with holes and secure with two screws
[refer to
(CHS2U-AU Chassis) on page
2. Install cabling into retention clips [refer to
Access Panel Removed (CHS2U-AU Chassis) on page
3. Insert access panel hinges into slots on rear of chassis.
4. Plug fan power cable into three prong plug [refer to
Opening Chassis Access Panel (CHS2U-AU Chassis) on page
5-75].
5. Reinstall access cover and secure with retaining screw (refer to
Figure 5-109 CHS2U-US Chassis Access Panel on page
Figure 5-111 Chassis Access Panel Removed
UNIVERGE SV8100/SV8300
5-75].
Figure 5-111 Chassis
Figure 5-110
Installing the SV8300 Chassis
5-75].
5-74).