Led Indications; Table 6-17 Ipla Daughter Board Led Indications; Table 6-18 Ipla Daughter Board Led Cn1 Transmit/Receive Data Indications - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED
Link 10/100 (LED 1)
LINK 1000 (LED2)
DUPLEX (LED3)
ACT
(LED4)

Table 6-18 IPLA Daughter Board LED CN1 Transmit/Receive Data Indications

LED
M bps
ACT (LED4)
DUPLEX (LED3)
LINK1000 (LED2)
LINK10_100
(LED1)
System Hardware Manual
3.5.4

LED Indications

LED indications for the PZ-32IPLA, PZ-64IPLA and PZ-128IPLA
Daughter Boards are indicated in
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to
with Daughter Boards Installed on page 6-14
Blade on page 6-22

Table 6-17 IPLA Daughter Board LED Indications

Function
10Base-T/100 Base-TX link speed indicator
1000Base-T link speed indicator
Duplex Status
Link activity or data transmission and
reception
The following table shows the LED indication when transmitting or
receiving data on CN1.
Auto Negotiation Mode
100Mbps
1000
Half Full
ON ON ON
ON OFF ON
ON OFF OFF
OFF ON ON
for the location of the LEDs on the blades.
LED Status
On Red
On Red
On Yellow
On Green
Link Up
10Mbps
1000
M bps
Half Full
ON ON ON
OFF ON ON
OFF OFF ON
OFF OFF OFF
Table 6-17 IPLA Daughter Board
Figure 6-4 CD-CP00-AU Blade
or Figure 6-6 CC-CP00
Operation Status
100 Base-TX link up
1000 Base-T link up
Full duplex operation
Link up completed
Force Mode
100Mbps
Half Full Half
ON ON
OFF ON OFF
OFF OFF OFF
ON ON
Issue No. 1.5
10Mbps
Full
ON ON
ON
OFF
ON ON
6 - 39