Figure 6-18 Installing The Pz-4Lca Daughter Board; Figure 6-19 Installing The Pz-8Lce Daughter Board; Table 6-25 Pz-4Lca/Pz-8Lce/ Rj-61 Cable Connector Pin-Outs - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
2. Position the PZ-4LCA
connector on the SLIU blade. Press the boards together,
ensuring the plastic spacers lock in place. Refer to
Installing the PZ-4LCA Daughter Board on page 6-52
6-19 Installing the PZ-8LCE Daughter Board on page
3. Install the PZ-4LCA
4.4.3 Connectors

Table 6-25 PZ-4LCA/PZ-8LCE/ RJ-61 Cable Connector Pin-Outs

show the pin-outs for the RJ-61 connector. Refer to
Installing the PZ-4LCA Daughter Board on page 6-52
Installing the PZ-8LCE Daughter Board on page 6-53
showing the location of the connectors on the SLIDB blades.
Table 6-25 PZ-4LCA/PZ-8LCE/ RJ-61 Cable Connector Pin-Outs
PZ-8LCE – CN2 (ports 9~12), CN3 (ports 13~16)
/
PZ-8LCE CN1 connector over the CN4
/
PZ-8LCE blade into the slot in the chassis.
RJ-61 Cable Connector –
PZ-4LCA – CN2 (ports 9~12)
Pin No.
1
2
3
4
5
6
7
8
Issue No. 1.5
Figure 6-18
and
6-53.
Figure 6-18
and Figure 6-19
for illustrations
Connection
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
Figure
6 - 55