Wm-L( ) Unit Attached To Wall Plate; Figure 7-80 Plugging In Line Cord - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
7 - 62
5.2.9

WM-L( ) UNIT Attached to Wall Plate

The WM-L( ) UNIT (Wall Mount Unit) is used to attach any DT300/
DT700 Series multiline terminal to the wall plate This unit connects to
the back side of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall plate using the WM-L( ) UNIT.
1. Plug line cord in the wall plate receptacle. Leave about eight
inches of cord and bundle the rest.
2. Feed the line cord through the opening in the WM-L( ) UNIT.
3. Plug the line cord into the multiline terminal as illustrated in
Figure 7-80 Plugging in Line
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100/SV8300
Cord.

Figure 7-80 Plugging in Line Cord