Figure 6-36 Cd-Vm00 Db9 To 6-Pin Modular Rs-232 Adapter - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
6 - 92
The CompactFlash Card Activity LED is controlled by the
IDE controller and indicates read/write activity on the
CompactFlash card.
6.1.4 Connectors
The following sections go into detail on each of the user interfaces.
6.1.4.1 RS-232 Interface
The RJ-11 connector with DB9 adapter (part number
1091014) is used for connection to an external PMS
Application or the PMS-U10 (Not available in Australia).
The cable used for a PC type DTE connection is a
standard line cord shown in
(DTE) on page
uses the swapped line cord shown in
Cable (DCE) on page
6.1.4.2 DB9 to 6-pin Modular RS-232 Adapter
6-93. The connection for a DCE device
6-93.

Figure 6-36 CD-VM00 DB9 to 6-Pin Modular RS-232 Adapter

Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
6.1.4.3 RS-232 Serial Cable
6.1.4.4 RS-232 Serial