UNIVERGE SV8100/SV8300
2.
System Hardware Manual
Note that the open end slides into the directory card holder.
Directory Card
Figure 11-20 Attaching Directory Card to Directory Card Holder
Locate the two grooves on the top of themultiline terminal as illustrated in
11-21 Attaching Directory Card Holder to the Multiline
directory card holder into the grooves on the multiline terminal until they snap into
place.
To remove the directory card, press the two sides of the directory card holder inward until
the tabs release and pull the holder out of the grooves.
Grooves
Figure 11-21 Attaching Directory Card Holder to the Multiline Terminal
Issue No. 1.5
Directory Card
Holder
Terminal. Push the
Multiline Terminal
Directory Card
Holder
Figure
11 - 13