Installation; Figure 6-6 Cc-Cp00 Blade - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
64 Ports without
PZ-ME50-AU
64 Ports with PZ-ME50-AU
(Memory Expansion Board)
256 Ports
Unlimited Ports (Up to 512)
X = Supported – = Not Supported
= Refer to NetLink feature in the SV8100 Features and Specifications Manual for more details regarding the
NetLink feature.
Only 1 CD-LTA blade can be installed when the CD-CP00-AU is installed with the PZ-ME50-AU. Up to 4 CD-LTA
blades can be installed per system (one per chassis) when the PZ-ME50-AU is installed on the CD-CP00-AU.
Only 8 ports of VRS are available when thePZ-ME50-AU is not installed on the CD-CP00-AU.
6 - 32
Table 6-15 PZ-ME50-AU Capacities
for the PZ-ME50-AU blade.
Table 6-15 PZ-ME50-AU Capacities
Basic System
( )
CD-CP00-AU
X
X
X
X
3.3.2

Installation

To install a PZ-ME50-AU on the CD-CP00-AU or CC-CP00:
For installation on the CD-CP00-AU blade refer to
CD-CP00-AU Blade with Daughter Boards Installed on page
installation on the CC-CP00 blade, refer to
on page 6-22.
This daughter board does not have any switch which needs to be set and does not
require any hardware setting.
Memory
System 256
Expansion
Port
Board
License
PZ-ME50-AU
– –
X –
X X
X X
Do not remove or install the CD-CP00-AU with
the power on.
Each node in a NetLink network requires the
PZ-ME50-AU.
CD-CP00-AU without the PZ-ME50-AU
installed, supports a single chassis system
only (six slots only).
CD-CP00-AU with the PZ-ME50-AU is
required to support a system with multiple
chassis.
CD-CP00-AU without the PZ-ME50-AU
supports only (one) CD-LTA (8 Digital
Station/2SLT) blade.
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
provides the maximum capacities
System
Unlimited
(Networked
Port
License
–
–
–
X
Figure 6-4

Figure 6-6 CC-CP00 Blade

NetLink
Chassis)
–
X
X
X
6-14. For