Figure 5-106 Chs1U-Au Chassis Access Panel; Figure 5-107 Opening Chassis Access Panel (Chs1U-Au Chassis) - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
2. Loosen retaining screw from chassis access panel.

Figure 5-106 CHS1U-AU Chassis Access Panel

3. Swing access panel outward and unplug fan power cable. See
Figure 5-107 Opening Chassis Access Panel (CHS1U-AU
Chassis).

Figure 5-107 Opening Chassis Access Panel (CHS1U-AU Chassis)

4. Remove chassis access panel from rear of chassis.
5. Remove cabling from retention clips. See
Access Panel Removed (CHS1U-AU Chassis)
Figure 5-108 Chassis Access Panel Removed (CHS1U-AU Chassis)
6. Remove two screws securing fan to access cover. Keep screws
for use when installing replacement fan [refer to
Chassis Access Panel Removed (CHS1U-AU
Retaining Screw
Fan Power Cable
Plug
Figure 5-108 Chassis
.
Chassis)].
Issue No. 1.5
Figure 5-108
5 - 73