Install Internal Batteries Chs2U-Au Chassis; Figure 5-68 Re-Install Fan Access Panel; Figure 5-69 Removing Battery Access Panel - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
5 - 52
14. Insert the access panel tab into the slot on the rear of the
CHS1U-AU chassis (see
Panel).
15. Secure panel with the retaining screw (refer to
Re-Install Fan Access
4.1.2

Install Internal Batteries CHS2U-AU Chassis

An internal battery source using two batteries can be installed using
the CHS2U BATT MTG KIT (mounting kit) and CHS2U BATT CA INT
(internal cabling).
1. Remove screws from battery access panel on rear of chassis.

Figure 5-69 Removing Battery Access Panel

UNIVERGE SV8100/SV8300
Figure 5-68 Re-Install Fan Access

Figure 5-68 Re-Install Fan Access Panel

Panel).
Installing the SV8300 Chassis
Figure 5-68