Issue No. 1.5
4 - 36
3.5.7
Install AC Power Cords
1.
Locate the supplied AC power cord and attach to the AC Inlet
located on the back of the Controlling Chassis.
CHS2U-AU
3.5.8
Install AC Power Cords on Multiple Chassis (Optional)
1.
Locate the supplied AC power cords and attach to the AC Inlets
located on the back of the Controlling and Expansion Chassis.
Figure 4-46 Install 19" AC Power Cords (Multiple-Chassis)
3.5.9
Install Additional Blades
Refer to Chapter 5,
6-2.
3.5.10
Apply Power to the 19" Chassis
Refer to Chapter 5,
Figure 4-45 Install the AC Power Cord
2.1 Installation and Safety Precautions on page
2.6 Powering Up the SV8100 on page
UNIVERGE SV8100/SV8300
AC Inlet
AC Power
Cords to
AC Inlets
6-7.
Installing the SV8100 Chassis