Figure 10-16 Cpru Connections - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10 - 22
5. Install bridging clips as required.
6. Plug a modular line cord from the mod jack to the CN1 connector on the
PGD(2)-U( ) ADP.
7. Connect an RCA jack to the audio output(s) on the back of the
PGD(2)-U( ) ADP.
8. The opposite end of this cable is connected to the external music source
either directly or by connecting to the cross-connect block where the
music source is connected.
UNIVERGE SV8100/SV8300

Figure 10-16 CPRU Connections

Installing SV8100/SV8300 Optional Equipment