Figure 10-66 Insert Stopper For Handset Use; Figure 10-67 Insert Connector For Handset Use - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10 - 72
13. If using the handset, place the stopper in the tilt leg.

Figure 10-66 Insert Stopper for Handset Use

14. For the Handset, set the connector in place.

Figure 10-67 Insert Connector for Handset Use

15. Attach the analog trunk cable and the handset cable. Refer to
Figure 10-60 PSA-L UNIT Connections on page
16. Reinstall the legs, pushing upwards until both locks snap into
place.
17. Return tilt leg to desired position.
18. Return the multiline terminal to the numbered keypad in the up
position.
19. Connect the Line cord, the PSTN cable and the Handset cord (if
used).
UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Optional Equipment
10-68.