Figure 5-54 System Expansion Cabling - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
1. Ensure Controlling and Expansion chassis are
powered down.
2. Using the NEC provided CAT5 straight-through
cable(s), attach one end to each Expansion Chassis
BUS connector on the PZ-BS11 blade (see
5-54 System Expansion
end to the BUS connector on the PZ-BS10 of the
Controlling Chassis.

Figure 5-54 System Expansion Cabling

3. Repeat for additional Expansion Chassis.
Issue No. 1.5
Figure
Cabling. Attach the opposite
5 - 43