Led Indications; Table 6-11 Cc-Cp00 Led Indications - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED Color
RUN Blue Status indications of CPU blade operation.
Off
Blinking (Slowly)
Blinking (120IPM)
SYSD Red Status indications of Flash ROM access
Off
Blinking
S1 Green Status indications on system reset.
Blinking (120IPM)
Status indications on CPU Program Upgrade (On-line).
On
Blinking (240IPM)
Blinking (120IPM)
Blinking (60IPM)
Blinking specially
(On : Off = 7 : 3)
Off
Status indications on CPU Program Upgrade (Off-line)
On
Off
S2 Green Status indications on system reset.
Blinking
Status indications of VoIPDB.
Off
On
Blinking
System Hardware Manual
3.2.4

LED Indications

Table 6-11 CC-CP00 LED Indications

its associated operation and status indications. Refer to
CC-CP00 Blade on page 6-22
CC-CP00.
Table 6-11 CC-CP00 LED Indications
No operation
Off-line/program upgrade (Off-line).
On-line (system operating normally).
Normal Status
Blinking while copying the system data from the flash memory to the
SDRAM.
Blinking while copying the CPU program from the flash memory to the
SDRAM
Remains lit after the CPU program download to the flash memory
(outdated side) is completed.
Blinking while downloading the CPU program to the flash memory
(outdated side).
Blinking after the CPU program download to the flash memory
(outdated side) is interrupted/fails.
Blinking while copying the program of flash memory (upgraded side)
to the flash memory (outdated side).
Blinking when the program copy from the flash memory (upgraded
side) to the flash memory (outdated side) is completed.
Off when the program change of the flash memory (outdated side) is
completed.
Remains lit after the CPU program download to the flash memory
(outdated side) is completed.
Off when the program change of the flash memory (outdated side)
and the flash memory (upgraded side) is completed.
Blinking while copying the system data from the flash memory to the
SDRAM or while downloading the DSP firmware program.
VoIPDB is not mounted/Office data is not assigned/VoIP license is
short.
VoIPDB is mounted (When the connection is established).
VoIPDB is mounted (when sending/receiving a packet).
provides a list of each LED and
for the location of the LEDs on the
Status
Issue No. 1.5
Figure 6-6
6 - 27