Installation - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
6 - 50
Constant current type battery feeding (25mA / -28Vdc)
Feeding Polarity Reverse Ability
Connector for PZ-4LCA/PZ-8LCE Daughter Boards
Ring Generator
Caller ID Sending Ability
Message Wait Lamp Ability
The CD-8LCA consumes eight ports ranging between ports 001~256.
The CN3 and CN5 connectors each provide connection to four analog
station ports. The CNx connectors are not polarity sensitive.
Refer to the following table for maximum upgrade capacity of the
/
CD-4LCA CD-8LCA SLIU blades:
Table 2-4 SV8100 Maximum System Capacities – Blades on
page 2-7
4.3.2

Installation

Install the CD-4LCA
If the PZ-4LCA/PZ-8LCE is used, install this prior to inserting the CD-8LCA into
the chassisLED Indications
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The CD/PZ-4/8LCA blades and the PZ-4LCA/
PZ-8LCE daughter boards are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to these
blades or daughter boards must be in the
building – no outside cabling is permitted.
Branch connection is not acceptable.
/
CD-8LCA blade into any available universal slot.
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300